ADVERTISEMENT

Page 4 of 4 FirstFirst 1234
Results 61 to 78 of 78
  1. #61
    Addicted Cruiser Dave50's Avatar
    Join Date
    Feb 2013
    Location
    Wichita, KS
    Age
    54
    Posts
    172
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    577

    Default Re: 2013 "SICKEST Board of '13" Board Building Competition - ENTRY THREAD

    part 4 - mild concave, about 3/8" Name:  19. concave.jpg
Views: 26772
Size:  23.8 KB

    I use threaded aluminum rivets that fit the standard 10-32 hardware ...
    and I have an unsubstantiated theory about the benefits of the bolts not touching the board. Name:  20. rivets.jpg
Views: 24489
Size:  35.2 KB

    The top logo has a hand-painted (that's why it looks like a child did it) background and the
    text is done by screen printing. Here I am laying that up with 2 layers of 4 oz fiberglass to get
    a cool woven texture on the top
    Name:  21. top logo layup.jpg
Views: 27392
Size:  43.2 KB

    and this is what it looks like after grip tape is applied Name:  22. top logo with griptape.jpg
Views: 24603
Size:  47.6 KB

    Added wheel wells, UHMW bumpers on both ends that stick out slightly so when you pop the board up it doesn't scratch the bamboo,
    and put on about 6 thin coats of Benjamin Moore clear floor urethane (at the suggestion of a wise builder on this forum)


    The finished product:
    Name:  23. finished bottom.jpg
Views: 2406
Size:  44.7 KBName:  24. finished bottom 2.jpg
Views: 1743
Size:  65.3 KB
    Last edited by Dave50; 09-04-2013 at 11:12 PM.


  2. ADVERTISEMENT


  3. #62
    Addicted Cruiser Dave50's Avatar
    Join Date
    Feb 2013
    Location
    Wichita, KS
    Age
    54
    Posts
    172
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    577

    Default Re: 2013 "SICKEST Board of '13" Board Building Competition - ENTRY THREAD

    last part - this is the board from the top. I used the "epoxy grip" from churchill, it's super thick and I kinda butchered the cut out

    Name:  25. finished top.jpg
Views: 1765
Size:  93.3 KB

    the footholds on the "Drone" have concave, the middle part of the board is essentially flat. Since this is a mild concave and everyone has a nickname for their pattern I have dubbed this one the "Training Bra"

    Name:  26. riding_1.jpg
Views: 22199
Size:  38.2 KBName:  27. riding_2.jpg
Views: 22810
Size:  43.1 KBName:  28. riding_3.jpg
Views: 24646
Size:  29.9 KB


    When riding in the footholds this has a very stiff flex, I'm a fat old guy at about 195 lbs and it doesn't move much with me on it.
    But standing in the middle with the cut outs it will really flex.
    Dimensions of the Drone are just under 39" in length, the width is 10.5", multiple wheelbases from 29" to 31" and before the griptape it weighed in at 4 lbs 4 oz.

    A couple more fun pics ... Name:  29. sunset.jpg
Views: 20991
Size:  38.8 KBName:  30. alley sfx.jpg
Views: 25253
Size:  72.5 KB

    thanks for checking it out!
    Last edited by Dave50; 09-04-2013 at 11:13 PM.

  4. #63
    Addicted Cruiser Dave50's Avatar
    Join Date
    Feb 2013
    Location
    Wichita, KS
    Age
    54
    Posts
    172
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    577

    Default Re: 2013 "SICKEST Board of '13" Board Building Competition - ENTRY THREAD

    2nd entry - this board is 2 layers of 3mm bamboo, triax and uni-directional fiberglass and a bottom layer of 1.5mm 2 colored bamboo -
    also on both sides and over the rice paper graphics there is a layer of 4 oz fiberglass

    In the previous entry you saw the press/concrete mold and crap so we skip that and start with the board coming out of the mold

    Name:  1. Out of the mold top.jpg
Views: 21489
Size:  33.9 KBName:  2. Out of the mold bottom.jpg
Views: 23985
Size:  37.8 KBName:  3. bottom graphic.jpg
Views: 22431
Size:  42.9 KBName:  4. specs.jpg
Views: 21083
Size:  36.9 KB



    And below, except for the mini gas grill, these are the tools used to do the basic cut-out

    Name:  5. tools of the trade_ex grill.jpg
Views: 21267
Size:  37.9 KBName:  6. rough cut bottom.jpg
Views: 19731
Size:  40.5 KB

    Now the bottom of the board after the rough cut
    Last edited by Dave50; 09-04-2013 at 11:17 PM.

  5. #64
    Addicted Cruiser Dave50's Avatar
    Join Date
    Feb 2013
    Location
    Wichita, KS
    Age
    54
    Posts
    172
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    577

    Default Re: 2013 "SICKEST Board of '13" Board Building Competition - ENTRY THREAD

    part 2 - routing the drop through cutouts

    Name:  7. drop thru cutout.jpg
Views: 22381
Size:  40.3 KBName:  8. drop thru cutout 2.jpg
Views: 20428
Size:  40.0 KB


    the cutout to shape is done with the router and the mdf template can be seen in the foreground of the second picture

    Name:  9. final cutout 1.jpg
Views: 21206
Size:  46.4 KBName:  10. final cutout 2.jpg
Views: 21328
Size:  45.5 KB


    sanding off and rounding the edges

    Name:  12. edge sanding.jpg
Views: 21260
Size:  35.9 KB


    uhmw bumpers at front and back are added

    Name:  13. uhmw bumpers added.jpg
Views: 21420
Size:  28.3 KB
    Last edited by Dave50; 09-04-2013 at 10:41 PM.

  6. #65
    Addicted Cruiser Dave50's Avatar
    Join Date
    Feb 2013
    Location
    Wichita, KS
    Age
    54
    Posts
    172
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    577

    Default Re: 2013 "SICKEST Board of '13" Board Building Competition - ENTRY THREAD

    part 3 - the finished product (lucid grip is used on the non-grip taped area which gives the logo a frosty look):

    Name:  14. final version top.jpg
Views: 21295
Size:  46.0 KBName:  15. final version bottom.jpg
Views: 20982
Size:  45.0 KB

    six0xis "Higher Re-education" dimensions: 37.8" x 10" wide wheelbase is 31" and the weight before grip was an even 4 lbs

    this board is cambered with a medium flex and has the mild [insert absurd name] "training bra" concave - the ride is supple and smooth with a well balanced fruity aftertaste

    I would ride it everyday but I promised it to my 17-yr-old son that lives in Wichita, KS and he is about 6 or 7 inches taller than me so it will be his.

    Name:  16. riding.jpg
Views: 20667
Size:  36.3 KB


    and here are some additional pics for no other reason than I want to post them ...

    Name:  17. brick_1.jpg
Views: 1671
Size:  55.0 KB

    Name:  18. brick_2.jpg
Views: 1658
Size:  51.7 KB

    Name:  19. brick_3.jpg
Views: 2358
Size:  75.1 KB
    Last edited by Dave50; 09-04-2013 at 11:38 PM.

  7. #66
    Addicted Cruiser Dave50's Avatar
    Join Date
    Feb 2013
    Location
    Wichita, KS
    Age
    54
    Posts
    172
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    577

    Default Re: 2013 "SICKEST Board of '13" Board Building Competition - ENTRY THREAD

    and three more for your viewing pleasure ...

    Name:  20. roundabout.jpg
Views: 1674
Size:  57.5 KB

    Name:  21. alley.jpg
Views: 1663
Size:  58.4 KB

    Name:  22. zoom_lens.jpg
Views: 1647
Size:  39.9 KB

    thanks for checking this one out as well!

  8. #67
    Stoked! sfgabe's Avatar
    Join Date
    Sep 2013
    Location
    Brooklyn, NY
    Posts
    2
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    0

    Default Re: 2013 "SICKEST Board of '13" Board Building Competition - ENTRY THREAD

    Name:  Screen shot 2013-09-11 at 9.08.09 PM.jpg
Views: 20505
Size:  46.8 KB

    Here's my first shot at a board. I do some woodworking but never tried a longboard. It's made of 100 year old reclaimed cedar from a barn in kentucky, with a padauk and pearl resin inlay.

    The black spots are where the old nails were when it was part of a barn. I thought that would make it look more recycled but now I'm thinking of covering those parts up with some strips of grip tape to make it look less scarred up.
    Name:  Screen shot 2013-09-11 at 9.07.20 PM.jpg
Views: 37709
Size:  67.2 KB

    Special thanks to Rob from longboard loft in NYC for finding me some paris trucks to finish it up.
    Name:  Screen shot 2013-09-11 at 9.07.36 PM.jpg
Views: 20232
Size:  59.1 KB

    Here's some of the construction shots.

    Name:  Screen shot 2013-09-11 at 9.04.12 PM.jpg
Views: 18559
Size:  31.2 KB
    The rough cut board

    Name:  Screen shot 2013-09-11 at 9.05.01 PM.jpg
Views: 18390
Size:  62.5 KB
    Routing out the inlay

    Name:  Screen shot 2013-09-11 at 9.05.14 PM.jpg
Views: 17753
Size:  63.0 KB
    Gluing down the padauk


    to be continued...
    Last edited by sfgabe; 09-11-2013 at 07:12 PM.

  9. #68
    Stoked! sfgabe's Avatar
    Join Date
    Sep 2013
    Location
    Brooklyn, NY
    Posts
    2
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    0

    Default Re: 2013 "SICKEST Board of '13" Board Building Competition - ENTRY THREAD

    Sanding down the inlay
    Name:  Screen shot 2013-09-11 at 9.05.24 PM.jpg
Views: 18969
Size:  72.0 KB

    Sealing with poly
    Name:  Screen shot 2013-09-11 at 9.09.08 PM.jpg
Views: 18476
Size:  25.1 KB

    First ride
    Name:  Screen shot 2013-09-11 at 9.08.37 PM.jpg
Views: 23028
Size:  51.3 KB

    More glamour shots
    Name:  Screen shot 2013-09-11 at 9.08.23 PM.jpg
Views: 22864
Size:  64.1 KB
    Name:  Screen shot 2013-09-11 at 9.07.50 PM.jpg
Views: 18462
Size:  51.3 KB

  10. #69
    Addicted Cruiser TioEmm's Avatar
    Join Date
    Mar 2010
    Location
    PDX
    Age
    55
    Posts
    418
    Post Thanks / Like
    Mentioned
    4 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    454

    Default Re: 2013 "SICKEST Board of '13" Board Building Competition - ENTRY THREAD

    Freestyle Freebord




    Length: 33.5in Width: 9.5in Waist: 8.5in
    Concave: 11/16in
    Rocker: 0.5in
    Setup: Freebord G3 trucks, freebord S2 bindings

    Materials:
    Grip with TioEmm logo cut-out
    Adhesive gold vinyl (to show through the grip cut-out)
    1/8” Pre-lam (carbon fiber on balsa-bamboo-balsa V-Lam)
    1/8” Pre-lam
    1/8” Pre-lam (carbon on the bottom)
    3/32” 5-ply Bamboo

    Designed for freestyle this deck is built with balsa/bamboo/carbon fiber “pre-lam”s. These are 1/8” balsa-bamboo-balsa V-Lams with carbon fiber applied to one side. The bamboo and carbon give the deck enough strength to stand up to freestyle abuse and the balsa reduces the weight for some big air. There are small tip/tail extensions to allow stalls. And, the deck is rockered to increase the edge wheel clearance.

    Prelams:


    Concave + Rocker Mold:


    The blank:


    Shaping:


    Grip cut-out:


    Rocker:


    Pre-lam end-on:


    Setup:




    Rockered deck increases edge wheel clearance:


    www.facebook.com/TioEmm

  11. #70
    Stoked! Darkfeather's Avatar
    Join Date
    May 2013
    Posts
    10
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    0

    Default Re: 2013 "SICKEST Board of '13" Board Building Competition - ENTRY THREAD

    Built this one a few months ago and is my regular ride with the MBK ....(Midnight Bombing Krew) ..... I was packing my boards up for my Honeymoon and realized I forgot to post.....
    Name:  0521131420.jpg
Views: 1465
Size:  30.3 KB

    Name:  0521131420a.jpg
Views: 1462
Size:  45.5 KB

    Name:  0521131420c.jpg
Views: 1449
Size:  55.0 KB

    Name:  0526131444.jpg
Views: 1443
Size:  34.5 KB
    Last edited by Darkfeather; 09-13-2013 at 06:44 PM.

  12. #71
    Stoked! Darkfeather's Avatar
    Join Date
    May 2013
    Posts
    10
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    0

    Default Re: 2013 "SICKEST Board of '13" Board Building Competition - ENTRY THREAD

    Final pics

    Name:  0528131713.jpg
Views: 1568
Size:  28.9 KB

    Name:  0617130915.jpg
Views: 1605
Size:  35.8 KB

    Name:  0617130916c.jpg
Views: 2255
Size:  22.6 KB

    Name:  0617130917a.jpg
Views: 1569
Size:  55.6 KB

    Name:  0617130916a.jpg
Views: 1561
Size:  67.9 KB
    Last edited by Darkfeather; 09-13-2013 at 06:40 PM.

  13. #72
    Stoked! Darkfeather's Avatar
    Join Date
    May 2013
    Posts
    10
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    0

    Default Re: 2013 "SICKEST Board of '13" Board Building Competition - ENTRY THREAD

    Okay.... I wasn't going to submit this one as it was the first board I built this year and while I love the board, I wasn't sure it would be classified as "sick".... However, my son and stepson changed my perception of the board when they said it was their favorite.... guess old style is making a come back lol....

    This board is thicker than most of my other boards.... the top deck is made from 1/4" Bubinga from Africa, Tamarand from Laos and Bocote from Mexico, pressed with 3 1/8" BB ply. Great for bombing.... okay for carving and pretty decent for cruising.....

    Name:  0421130938.jpg
Views: 1511
Size:  28.8 KB


    Name:  0421131209.jpg
Views: 1451
Size:  68.0 KB


    Name:  0421131210c.jpg
Views: 1445
Size:  33.1 KB


    Name:  0422131338a.jpg
Views: 1474
Size:  50.1 KB


    Name:  0424131152b.jpg
Views: 1455
Size:  49.3 KB

    Pressing
    Name:  0424131152d.jpg
Views: 1466
Size:  44.3 KB

  14. #73
    Stoked! Darkfeather's Avatar
    Join Date
    May 2013
    Posts
    10
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    0

    Default Re: 2013 "SICKEST Board of '13" Board Building Competition - ENTRY THREAD

    Name:  0914131535a.jpg
Views: 1482
Size:  81.7 KB

    Name:  0914131536a.jpg
Views: 1481
Size:  73.6 KB

    Name:  0914131536b.jpg
Views: 1450
Size:  84.1 KB

    Name:  0914131536c.jpg
Views: 1461
Size:  53.7 KB

    Name:  0914131621.jpg
Views: 2127
Size:  70.2 KB

    Name:  0914131622a.jpg
Views: 1448
Size:  69.9 KB

  15. #74
    Concrete Kahuna mbease's Avatar
    Join Date
    Sep 2007
    Location
    Ill IL
    Age
    29
    Posts
    1,854
    Post Thanks / Like
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    713

    Default Re: 2013 "SICKEST Board of '13" Board Building Competition - ENTRY THREAD

    So here's mine. It turns out I will only be submitting one, as my first entry (a carbon fiber commuter/mini speedboard) had a very yellow finish that, in my opinion, compromises the look I was going for. My second entry was a slide deck prototype, but it was too heavy, thick, and cumbersome, so while there is a photo below of it, I will only be submitting its successor, slide deck prototype #2.

    All that aside, here are a bunch of photos for everyone to make sense of. Feel free to ask questions about my entry in the upcoming voting thread and/or results thread soon thereafter.

    Presenting, the second slide deck prototype, my new favorite board. This is composed of a birch core, sandwiched with maple veneers, and reinforced with carbon fiber on bottom. It's very thin, super light, and extra nimble when sliding:














    The first prototype:






    The template:




    Sanding wells, laminating carbon, and clear coats:
















    Pressed in this sucker:




    And the real results:


  16. #75
    Concrete Kahuna mbease's Avatar
    Join Date
    Sep 2007
    Location
    Ill IL
    Age
    29
    Posts
    1,854
    Post Thanks / Like
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    713

    Default Re: 2013 "SICKEST Board of '13" Board Building Competition - ENTRY THREAD

    I'll let this thread run until I post the next thread tomorrow! So if you need a couple more hours, have at it.

  17. #76
    Stoked! AlfredNrll's Avatar
    Join Date
    Apr 2013
    Location
    Sweden, Stockholm
    Age
    21
    Posts
    7
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    0

    Default Re: 2013 "SICKEST Board of '13" Board Building Competition - ENTRY THREAD

    Hi guys, i have been building boards for about 1 year and these are my two latest creations and candidates to this contest!

    Both boards are of the same model, just diferent finish on them :]

    Specs:
    38.5" * 10" length and width
    3/4" concave
    1/2" bubble drop
    1/2" rocker
    gaspedals
    wheelwells

    materials in the blue
    280g twill black fibreglass
    280g twill black fibreglass
    160g twill fibreglass
    baltic birch 4mm
    baltic birch 4mm
    baltic birch 4mm
    160g twill fibreglass
    280g twillfibreglass
    280g twill black fibreglass
    200g high modular polyester

    Super mega heavy duty, ultra stiff of hell, board for heavy riders

    the dark on is just a bit less fibreglass


    This is the press wich is pressing one of the boards
    Name:  474697_614520751891472_186614418_o.jpg
Views: 18121
Size:  45.2 KB

    this is one of the uncut blank with lines for the roughcut
    Name:  1616_614520738558140_1630128644_n.jpg
Views: 20899
Size:  24.1 KB

    this is the router tmplate sitting on one of the boards
    Name:  1003114_614520811891466_1055854290_n.jpg
Views: 21072
Size:  23.1 KB

    These are the diferent composites i used, it was fibreglass, black fibreglass, kevlar and some sort of really strong polyester weave (the coloured one)
    Name:  1277129_652044284805785_77999014_o.jpg
Views: 18261
Size:  46.2 KB

    Here are the boards with the weaves on and a gloss coat, before the graphics
    Name:  1268222_652044138139133_1194958224_o.jpg
Views: 18120
Size:  55.3 KB

    Here they are, all finished
    Name:  556834_652044698139077_1119277319_n.jpg
Views: 23736
Size:  50.8 KB

    Hope you like them!
    Last edited by AlfredNrll; 09-15-2013 at 05:24 AM.

  18. #77
    Stoked! AlfredNrll's Avatar
    Join Date
    Apr 2013
    Location
    Sweden, Stockholm
    Age
    21
    Posts
    7
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    0

    Default Re: 2013 "SICKEST Board of '13" Board Building Competition - ENTRY THREAD

    i dont have any riding or setup pics with the dark one cuz it got sold the day after it got finisehd but here is some of the blue one

    Its setup with indeezs and these wheels
    Name:  533248_659545390722341_907895345_n.jpg
Views: 18160
Size:  53.1 KB

    Name:  1234716_659545387389008_20919312_n.jpg
Views: 18805
Size:  13.4 KB

    Name:  1187136_659545334055680_1214108365_n.jpg
Views: 18800
Size:  12.8 KB


    Name:  1236692_659545200722360_1799166502_n.jpg
Views: 18163
Size:  19.9 KB

    Name:  601742_659545467389000_823306439_n.jpg
Views: 18161
Size:  16.4 KB
    Attached Images Attached Images  

  19. #78
    Stoked! AlfredNrll's Avatar
    Join Date
    Apr 2013
    Location
    Sweden, Stockholm
    Age
    21
    Posts
    7
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    0

    Default Re: 2013 "SICKEST Board of '13" Board Building Competition - ENTRY THREAD

    And the last pic cuz i couldnt get it in the last post


    Name:  1176246_659545244055689_571719044_n.jpg
Views: 20231
Size:  45.7 KB

    Name:  1236692_659545200722360_1799166502_n.jpg
Views: 23439
Size:  62.7 KB

    Name:  1234716_659545387389008_20919312_n.jpg
Views: 20955
Size:  44.1 KB
    Last edited by AlfredNrll; 09-15-2013 at 02:05 PM.

Page 4 of 4 FirstFirst 1234

ADVERTISEMENT



OUR SPONSORS


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Join Silverfish